HIT-Z

Applications

■ Fastenings in cracked and uncracked concrete made with Hilti HIT HY200
■ Fastenings where shallow embedment is required

Advantages

■ Very high loads in cracked concrete
■ Very productive solution that saves cleaning time
■ The only approved anchor system for diamond-cored holes - for quick drilling progress in reinforced concrete

Approvals
ETA, Seismic	ETA 12/0006 for HIT-HY 200-R injection mortar and HIT-Z(R) rod for anchoring applications (ETAG 001-05, Option 1)
	ETA 12/0084 for HIT-HY 200-R injection mortar and standard element for anchoring applications (ETAG 001-05, Option 1)
ICC-ES	ICC-ES ESR-3187 for HIT-HY 200 A/R injection mortar
Approvals and test reports may apply to selected products only. Please refer to the documents for details.

Anchor rod (metric) Hilti HIT-Z

Technical data

Base materials:

Concrete (cracked, uncracked)

Anchor type:

Off-the-shelf rods

Head configuration:

Externally threaded

Environmental conditions:

Indoor, dry conditions

Type of fastening:

Pre-fastening, Through-fastening

Approvals / test reports:

ETA

Material composition:

Steel, zinc-plated (min. 5 μm)

Ordering designation	Anchor size	Base plate clearance hole	Baseplate clearance hole pre-fastening	Base plate clearance hole through-fastening	Item number
HIT-Z M8x80	M8	9 mm	9 mm	11 mm	2018364
HIT-Z M8x100	M8	9 mm	9 mm	11 mm	2018365
HIT-Z M8x120	M8	9 mm	9 mm	11 mm	2018366
HIT-Z M10x95	M10	12 mm	12 mm	14 mm	2018367
HIT-Z M10x115	M10	12 mm	12 mm	14 mm	2018368

Ordering designation	Required tightening torque	Wrench size	Anchor length	Sales pack quantity	Item number
HIT-Z M8x80	10 Nm	13 mm	80 mm	40 pc	2018364
HIT-Z M8x100	10 Nm	13 mm	100 mm	40 pc	2018365
HIT-Z M8x120	10 Nm	13 mm	120 mm	40 pc	2018366
HIT-Z M10x95	25 Nm	17 mm	95 mm	40 pc	2018367
HIT-Z M10x115	25 Nm	17 mm	115 mm	40 pc	2018368

Further sizes are also available, please contact us

Anchor rod (stainless metric) Hilti HIT-Z-R

Technical data

Base materials:

Concrete (cracked, uncracked)

Anchor type:

Off-the-shelf rods

Head configuration:

Externally threaded

Environmental conditions:

Covered by ground soil, Outdoor, Underwater, fresh water

Type of fastening:

Pre-fastening, Through-fastening

Approvals / test reports:

ETA

Material composition:

Steel, A4 (SS316)

Ordering designation	Anchor size	Baseplate clearance hole pre-fastening	Base plate clearance hole through-fastening	Required tightening torque	Item number
HIT-Z-R M8x80	M8	9 mm	11 mm	10 Nm	2018422
HIT-Z-R M8x100	M8	9 mm	11 mm	10 Nm	2018423
HIT-Z-R M8x120	M8	9 mm	11 mm	10 Nm	2018424
HIT-Z-R M10x95	M10	12 mm	14 mm	25 Nm	2018425
HIT-Z-R M10x115	M10	12 mm	14 mm	25 Nm	2018426

Ordering designation	Wrench size	Anchor length	Useable thread length	Sales pack quantity	Item number
HIT-Z-R M8x80	13 mm	80 mm	8 mm	40 pc	2018422
HIT-Z-R M8x100	13 mm	100 mm	28 mm	40 pc	2018423
HIT-Z-R M8x120	13 mm	120 mm	48 mm	40 pc	2018424
HIT-Z-R M10x95	17 mm	95 mm	22 mm	40 pc	2018425
HIT-Z-R M10x115	17 mm	115 mm	42 mm	40 pc	2018426

Further sizes are also available, please contact us